The Swiss vehicle registration explained: matriculation number, type approval, VIN and every field
Where is the matriculation number, what is the type approval and what does “IVI” mean? We explain the Swiss vehicle registration (Fahrzeugausweis) field by field – with the key numbers for buying, selling and insurance.

The grey vehicle registration (Fahrzeugausweis / permis de circulation) is the most important document for every car in Switzerland. Whether you buy, sell, insure or list a vehicle, you keep needing the same details from it. Here is what each field means – and which numbers you should not mix up.
Layout: two pages, numbered fields
The left-hand page is about the holder: name and address (fields 01–06), date of birth (07), country of origin (08), insurance (09) and cantonal annotations and official decisions (13 and 14). The right-hand page describes the vehicle. Every field has a number, and the labels are in German, French, Italian and Romansh. The letters in the margin (A, B, D, E, F, G) are the codes harmonised across Europe, e.g. E for the chassis number.
The key fields on the vehicle page
- 15 – Number plate (A): canton code and number. The plate belongs to the holder, not to the vehicle.
- 18 – Matriculation number (Stammnummer): the vehicle’s Swiss identification number, format 123.456.789.
- 19 – Vehicle category: e.g. passenger car, with a code.
- 21 – Make and type (D): e.g. “AUDI A3”.
- 23 – Chassis no. (E): the 17-character VIN.
- 24 – Type approval: the number of the approved vehicle type, or “IVI”.
- 25 – Body and 26 – Colour.
- 27 – Seats: total and of which in front.
- 30 – Kerb weight (G), 32 – Payload, 33 – Gross weight (F), 31 – Towing capacity, 35 – Gross train weight, 55 – Roof load.
- 36 – First registration (B): date of first registration – on older documents with a two-digit year, e.g. 21.02.01.
- 37 – Displacement in cm³ and 76 – Power in kW.
- 72 – Emission code: the exhaust emission standard under which the vehicle is approved.
- 38 – Issue: place and date this registration was issued.
- 39 – Inspections: date of the last roadworthiness test (MFK) with the canton code.
Asterisks (e.g. **1615) only pad the field and are not part of the value. A field filled entirely with asterisks has no entry.
Matriculation number, VIN, type approval: the difference
Matriculation number (field 18)
The matriculation number is issued by the Swiss authorities and identifies a vehicle in Switzerland. It stays with the vehicle even when it changes holder or canton. Insurers and road traffic offices often ask for it.
Chassis number (field 23)
The chassis number (VIN) is assigned by the manufacturer. It is unique worldwide, has 17 characters and is also found on the vehicle itself. Where exactly: Where to find the VIN. What the characters mean: Decoding a VIN.
Type approval (field 24)
The type approval does not identify a single car but the approved vehicle type, e.g. 1MG641. Many vehicles of the same model share this number. It is used, for example, for insurance quotes.
What does “IVI” mean in the type approval field?
If field 24 says “IVI” or “IVIX”, the vehicle was registered on the basis of an electronic certificate of conformity (eCoC) with the manufacturer’s initial vehicle data. According to FEDRO, this entry appears instead of a Swiss type approval or data sheet number. For these vehicles, fields 27 (front seats) and 55 (roof load) are also left empty – the roof load is in the owner’s manual. It is not a mistake.
Tips for buying and selling
- Compare the VIN: the chassis number in the registration must match the one on the vehicle.
- Check the inspections: field 39 shows when the vehicle was last tested.
- Read the annotations: fields 13 and 14 contain conditions and notes from the authorities.
- No equipment details: the registration shows neither factory nor optional equipment. Find out how to get it in Finding a car’s optional equipment by VIN.
For car dealers: simply scan the vehicle registration
If you add vehicles every day, you type these fields over and over – and a typo in 17 characters happens fast. With the NXTRA car dealer software you just photograph the registration with your phone: chassis number, matriculation number, type approval, first registration and technical data are taken over automatically, and make and model are preselected in the catalogue. Holder details are not taken over. One click on the VIN lookup then adds the factory and optional equipment.
In short
- Matriculation number: field 18, format 123.456.789, Swiss vehicle number.
- Chassis number (VIN): field 23, 17 characters, from the manufacturer.
- Type approval: field 24, identifies the vehicle type – or “IVI”.
- First registration: field 36, last inspection: field 39.
